Household Steam Turbine Generator

Incoterm: FOB
Min. Order: 1 Set/Sets

Basic Info

Generator Type: Alternator

Output Type: AC Three Phase

Certification: CE, ISO

Standard: Standard

Additional Info

Packaging: In cases

Brand: QNP

Transportation: Ocean,Land

Place of Origin: China

Certificate: ISO9001,CE

Port: Qingdao Port,Shanghai Port

Product Description

Household Steam Turbine Generator:

A steam turbine generator is a device that uses steam to rotate a turbine generator to produce electricity.Steam turbines use water that is heated to extremely high temperatures and converted into steam to rotate the blades of a turbine, in order to create mechanical or rotational energy.  

This rotational energy caused by the high pressured steam turbine is used to generate electricity in an attached generator. Steam turbine generators require an outside fuel source to heat water into the steam needed for electric production.

QNP`s steam turbine generator can adopt static silicon controlled excitation, two-pole AC brushless excitation and three-pole AC brushless excitation.


Steam Turbine Generator (21)


Characteristic and Performance of Generator main parts

Stator:
Stator consists of base, stator core and stator windings.
The base is welded by steel plate, the structure is light and sturdy, and the base is divided into many air inlet and outlet zones in the axial direction;

Stator coil:
It is stacked by strands of copper wire covered by polyester glass fiber, with half-unit type and basket shaped structure (parts of stator coils use transposition structure). The insulation grade of the stator coil is F grade. The stator coil is shaped by continuous wrapping and mould pressing with mica tapes. The coil end is firmly tied up to the support and the bundling ring with unidirectional tapes or dacron-glass ropes thus the turbo-generator unit became highly resistant towards sudden short-circuit conditions. 
   
Stator core:
Stator core is punched and stacked by cold rolled non-oriented, high permeability, low loss high-quality silicon steel sheet, both sides of the silicon steel sheet are coated with a solid insulating film to prevent short-circuit between the stator core pieces to reduce eddy current loss.

Rotor:
The rotor is composed of shaft, coil, center ring, shroud ring and fan ring etc. The rotor coil is made of cold-drawn flat copper wires, and processed by oxygen-free annealing. The rotor coil of generator with 50MW and above is welded together by silver-bearing cold-drawn copper wires and adopts F grade insulation. 

The shroud ring at rotor coil end is made of non-magnetic steel. Both ends of the rotor are equipped with centrifugal fan or axial flow fan with paddle fan blade which is forged by high-strength aluminum alloy.

Rotor machining:
The generator shaft is forged from an integral high-quality alloy steel and has an axial groove formed thereon for fitting a rotor coil and an air groove or a crescent groove is made in the large tooth to enhance the cooling of the main body and the coil end. The slots are processed by special machine for generator rotor processing, Tacchi high precision horizontal slotting and milling machine made in Italy, to ensure the high efficiency of generator. 

The generator rotor must be subjected to high-speed dynamic balancing experiment and dynamic impedance experiment before delivery to verify the mechanical strength of the rotor and ensure excellent inter-turn insulation of the rotor windings.

Models

Mainly produce the following models of steam turbine generator and the specifications are as follows:


Model  Voltage (KV)  Frequency (Hz)  Power (MW)
2 Poles Steam Turbine Generator 6.3-3.8 50 3-60
6.6-13.8 60
4 Poles Steam Turbine Generator 0.4/0.69 6.3/6.6 10.5/11 50  0.5-30
0.4-11 60



Steam Turbine Generator (5)


Company Overview:

Located in the Qingzhou city of Shandong province, QNP(QingNeng Power)has developed into the largest leading private manufacturer of steam turbines and generators in China, covering an area of 200,000 square meters with building area of 90,000 square meters. We have subsidiaries in Indonesia and Beijing, as well as a branch office in Shanghai. 


about qingneng power-1


QNP has passed such certificates as CE, ISO9000, ISO14001 and OHSAS18001.


Our Product & Service:


QNP`s main products include steam turbines, generators, electrical control equipment,  water treatment equipment and other relevant products.

Manufacturing steam turbine, generator (≤100MW)with I&Cl system, electrical panels & switchgearsspare parts and etc. Providing 1~1000MW Overhaul & Commissioning, Energy Saving Reform and Upgrading, Operation Supervision Service for Power Plant and so on. Contracting Power Plant Turn-key Project.


QNP manufactures various steam turbines. At present, we mainly focus on the research and promotion of single layout and packaged steam turbines, as well as High speed & high efficiency steam turbines.

QingNeng Power Main Products


Manufacturing and Capacities:

With strong manufacturing and machining capacities, main parts and key components of our products are made by CNC machines. More than 400 types of advanced equipment with high accuracy, strong reliability and advanced machining processes are available with QNP, such as the Mitsubishi Planer five sides machining center, the Italy horizontal slotting machine, the 10 meters CNC heavy duty horizontal lathe, the 8 meters vertical lathe, the 6 meters CNC grinding machine, the CNC gantry milling and drilling machine, the CNC gantry wrapping machine and the winding machine for generators. The components are standardized and modularized with enhanced universality and compatibility.


Manufacture & Test


Our state of the art quality test center consists of a physics lab, a chemistry lab, a chemical analysis lab, a precision measurements lab and a metrology lab. The high speed dynamic balancing test machine can test rotors at speeds up to 15000 rpm. The Steam Turbine trial platform can do load tests and performance verification tests. Other instruments such as our German direct-reading spectrometer, tri-linear coordinate measuring instrument, and our speed test platform provide reliable assurance of product quality.


Project Cooperate With Us:

  • QNP, in cooperation with the Chinese Academy of Sciences (CAS) has adapted it's evaporative cooling technology for cooling of distributed energy Generators, which has reduced the size of Generators significantly.
  • In collaboration with Sea Water Desalination Institute of State Oceanic Administration, QNP has formed a technical team to carry out research on the key technologies of power generation and sea water desalination.
  • The rapid development of QNP has captured the attention of the Fortune Global 500 companies, such as the MAN Group from Germany, and Mitsubishi Heavy Industries from Japan. These companies and numerous others have worked with QNP for technical exchanges.
  • QNP has also gotten strong support from central and local government. Top government officials at all levels have visited QNP many times and given high ratings on QNP`s development.

QNP Project


Sales  Network & After Sales:

The market share of QNP is growing steadily and rapidly. Our agents and products have a presence in many countries and regions all over the world such as the U.S.A, Canada, Brazil, Argentina, Russia, Australia, Serbia, India, Indonesia, Pakistan, the Philippines, Thailand, Cambodia, Vietnam, Iran, Myanmar, as well as Sudan, Morocco and Algeria in Africa.


QNP has a skilled and experienced After Sales team geared up for fast response and superior services to our customers at any time. Our Long distance monitoring center is equipped to monitor, diagnose, serve and manage the units delivered. QNP also provides technical training to our customers at regular intervals.


QingNeng Power Company


© 2019 CHINA WAY. All Rights Reserved.  Shandong Qingneng Power Co., Ltd.,  Inc.   All rights reserved. site map.  sitemap.html